DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 2850n on BT INFINITY

More
18 Apr 2012 09:02 #71933 by otto-mate
Replied by otto-mate on topic Re: Vigor 2850n on BT INFINITY
Just ordered the newly speed doubled BT Infinity and we are predicted to get 68Mb/s. The 2850's specs mention up to 50Mb/s. Is there a way to increase this or another product that supports these highter speeds?

Thanks

M.

Please Log in or Create an account to join the conversation.

More
18 Apr 2012 16:05 #71945 by newportnet
Replied by newportnet on topic Re: Vigor 2850n on BT INFINITY

Otto-Mate wrote: Just ordered the newly speed doubled BT Infinity and we are predicted to get 68Mb/s. The 2850's specs mention up to 50Mb/s. Is there a way to increase this or another product that supports these highter speeds?


My 2850n syncs at 79985. Would be nice to see some clarification if this is at odds with the documentation.

Please Log in or Create an account to join the conversation.

More
19 Apr 2012 13:34 #71952 by admin
Replied by admin on topic Re: Vigor 2850n on BT INFINITY
Specs. tend to be conservative as it hasn't been tested so although that's the max. official speed, it will probably sync. much faster.

Forum Administrator

Please Log in or Create an account to join the conversation.

More
25 Apr 2012 10:50 #72016 by netknow
Replied by netknow on topic Re: Vigor 2850n on BT INFINITY

21alpha wrote: Hi
I got my 2850n last night and followed the quick setup guide.
I couldnt connect to the internet via WAN 1 (VDSL) port until I put the VLAN ID tag of 101 into the relevant page. As soon as I did that - Bingo!



I've tried to get my new 2850N (3.6.1) to connect to Zen Fibre Active (Infinity) and it just won't establish a DSL link. It cycles between handshake and then training for a minute or so and then back to handshake. I have set the VLAN ID tag to 101 in the WAN >> General Setup: WAN 1 but no joy.

Currently having to use using WAN2 PPPoE via Openreach modem.

I would be grateful for any pointers ...

Thanks,

Geoff

Please Log in or Create an account to join the conversation.

More
25 Apr 2012 14:26 #72022 by zz9pa
Replied by zz9pa on topic Re: Vigor 2850n on BT INFINITY
I seem to be having the same problem - just put up a new post with my screen dumps for my settings..

Please Log in or Create an account to join the conversation.

More
11 May 2012 13:23 #72200 by ianritchie
Replied by ianritchie on topic Re: Vigor 2850n on BT INFINITY
Has this been resolved yet? I've just had VDSL installed and am getting the same problem, cannot sync on WAN1. I'm using the 3.6.1 firmware.

I've email Draytek support to see if they can help but it sounds as though many people are managing to sync with no problem.

Please Log in or Create an account to join the conversation.

Moderators: Chris, Sami