DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Ap800 Help please.

  • cornz
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
16 Jun 2013 14:06 #76621 by cornz
Replied by cornz on topic Re: Ap800 Help please.
http://youtu.be/dqD_qAv1T-s

This hightlights the issue.....

Uploading complete

Please Log in or Create an account to join the conversation.

More
16 Jun 2013 18:20 #76623 by babis3g
Replied by babis3g on topic Re: Ap800 Help please.

cornz wrote: http://youtu.be/dqD_qAv1T-s

This hightlights the issue.....

**still uploading**


I see you have posted since 2:06 pm ... if is still processing since that time you may need to upload it again ... it seems somewhere the upload cracked

Please Log in or Create an account to join the conversation.

  • cornz
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
16 Jun 2013 20:21 #76627 by cornz
Replied by cornz on topic Re: Ap800 Help please.

babis3g wrote:

cornz wrote: http://youtu.be/dqD_qAv1T-s

This hightlights the issue.....

**still uploading**


I see you have posted since 2:06 pm ... if is still processing since that time you may need to upload it again ... it seems somewhere the upload cracked



Its been going slow all day, must be a busy day on youtube...However, its now uploaded.
http://youtu.be/dqD_qAv1T-s

Please Log in or Create an account to join the conversation.

More
16 Jun 2013 22:50 #76628 by babis3g
Replied by babis3g on topic Re: Ap800 Help please.
i ve seen the video thanks
I notice: you don't have the latest firmware as you told me ... In the video is appearing 1.0.4 ... that is a 2 firmwares behind

i would say
Update to latest firmware 1.1.0 ... not sure if will help for the issue but is worth it to update as only take few minutes
Here where to get it
http://www.forum.draytek.co.uk/viewtopic.php?f=19&p=76606#p76606

Master reset if any current bug prevent scanning or mismatching ... update ... and master reset again

When you done it ... based at the video ... the first time it did scanned ...so i would say go ahead and set it up straight away without further experiments

Please Log in or Create an account to join the conversation.

  • cornz
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
17 Jun 2013 12:01 #76643 by cornz
Replied by cornz on topic Re: Ap800 Help please.

babis3g wrote: i ve seen the video thanks
I notice: you don't have the latest firmware as you told me ... In the video is appearing 1.0.4 ... that is a 2 firmwares behind

i would say
Update to latest firmware 1.1.0 ... not sure if will help for the issue but is worth it to update as only take few minutes
Here where to get it
http://www.forum.draytek.co.uk/viewtopic.php?f=19&p=76606#p76606

Master reset if any current bug prevent scanning or mismatching ... update ... and master reset again

When you done it ... based at the video ... the first time it did scanned ...so i would say go ahead and set it up straight away without further experiments



No, the FIRST time it scanned, it was in AP mode (factory default) NOT Repeater mode, in which it will NOT scan.
Also, according to Draytek UK (http://www.draytek.co.uk/support/download/vap800_1031zip) 1.0.3 is the latest firmware but mine are 1.0.4 so are already more upto date.

Please Log in or Create an account to join the conversation.

More
17 Jun 2013 12:32 #76646 by babis3g
Replied by babis3g on topic Re: Ap800 Help please.
Hi again ...The more up to date is 1.1.0 and i looked at the released notes and there is few fixes for universal mode, hopping it will help the scan
Personal i did the upgrade (since the 1.1.o was out) with the way i mentioned
I will connect mine later to see if has same issue at universal mode with the 1.1.0 i have
I also have find a video from a user and works (for him) but not sure with which version but maybe if you try set it up with the same order it may works
http://www.youtube.com/watch?v=fm5Fl5wye9g

Please Log in or Create an account to join the conversation.

Moderators: Chris, Sami