DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 130 Low Sync Speed

  • highpriest
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
25 May 2016 22:26 #1 by highpriest
Vigor 130 Low Sync Speed was created by highpriest
I replaced my BT HomeHub 5B with a Vigor 130 + EdgeRouter PoE setup. On install day...

Code:
> show adsl ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) ----------- Running Mode : 17A State : SHOWTIME DS Actual Rate : 79997000 bps US Actual Rate : 19999000 bps DS Attainable Rate : 88255748 bps US Attainable Rate : 22444000 bps DS Path Mode : Fast US Path Mode : Fast DS Interleave Depth : 1 US Interleave Depth : 1 NE Current Attenuation : 14 dB Cur SNR Margin : 8 dB DS actual PSD : 2. 0 dB US actual PSD : 14. 1 dB NE CRC Count : 0 FE CRC Count : 33834 NE ES Count : 2 FE ES Count : 26392 Xdsl Reset Times : 0 Xdsl Link Times : 1 ITU Version[0] : b5004946 ITU Version[1] : 544e0000 VDSL Firmware Version : 05-07-04-03-00-07 [with Vectoring support] Power Management Mode : DSL_G997_PMS_L0 Test Mode : DISABLE -------------------------------- ATU-C Info --------------------------------- Far Current Attenuation : 13 dB Far SNR Margin : 7 dB CO ITU Version[0] : b5004244 CO ITU Version[1] : 434da459 DSLAM CHIPSET VENDOR : < BDCM >

3 days later...

Code:
> vdsl status ---------------------- ATU-R Info (hw: annex A, f/w: annex A/B/C) ----------- Running Mode : 17A State : SHOWTIME DS Actual Rate : 73999000 bps US Actual Rate : 19999000 bps DS Attainable Rate : 88291792 bps US Attainable Rate : 22182000 bps DS Path Mode : Fast US Path Mode : Fast DS Interleave Depth : 1 US Interleave Depth : 1 NE Current Attenuation : 14 dB Cur SNR Margin : 9 dB DS actual PSD : 2. 1 dB US actual PSD : 14. 1 dB NE CRC Count : 0 FE CRC Count : 34303 NE ES Count : 0 FE ES Count : 26813 Xdsl Reset Times : 0 Xdsl Link Times : 1 ITU Version[0] : b5004946 ITU Version[1] : 544e0000 VDSL Firmware Version : 05-07-06-0D-01-07 [with Vectoring support] Power Management Mode : DSL_G997_PMS_L0 Test Mode : DISABLE -------------------------------- ATU-C Info --------------------------------- Far Current Attenuation : 14 dB Far SNR Margin : 6 dB CO ITU Version[0] : b5004244 CO ITU Version[1] : 434da459 DSLAM CHIPSET VENDOR : < BDCM >

Bit baffled. Why is it now syncing at a much lower speed? Thanks in advance!

Please Log in or Create an account to join the conversation.

More
25 May 2016 23:32 #2 by voodle
Replied by voodle on topic Re: Vigor 130 Low Sync Speed
The SNR value is pretty much the same so it's probably something outside - potentially if there's more people nearby getting connected to FTTC, that slows things down due to the crosstalk

Please Log in or Create an account to join the conversation.

  • highpriest
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
26 May 2016 00:08 #3 by highpriest
Replied by highpriest on topic Re: Vigor 130 Low Sync Speed
It's too much of a coincidence. It has been working stable at the full speed for over 4 years. Could my line have gone into some kind of "learning" mode perhaps?

Weirdly, the HH5 is also now syncing at the lower speed.

Code:
1. Product Name: HomeHub5 2. Serial number: +076284+1418005732 3. Firmware version: v0.07.05.0A13-BT (Type B) Last updated 9/12/2015 4. Board version: 01 5. VDSL uptime: 0 days, 00:06:30 6. Data Rate: 19999 / 74000 7. Maximum Data Rate: 22397 / 90991 8. Noise Margin: 7.1 / 10.6 9. Line Attenuation: 13.7 / 14.2 10. Signal Attenuation: 0.0 / 0.0 11. Data sent/received: 0.1 MB / 0.4 MB 12. Broadband username: bthomehub@btbroadband.com

Please Log in or Create an account to join the conversation.

More
26 May 2016 14:26 #4 by piste basher
Replied by piste basher on topic Re: Vigor 130 Low Sync Speed
My vdsl line has been stable at 34998 download for over a year. On 27th April it dropped to 32397 and has shown no sign of going back up again. At least they put lines on pint glasses....

Please Log in or Create an account to join the conversation.

  • highpriest
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
26 May 2016 16:18 #5 by highpriest
Replied by highpriest on topic Re: Vigor 130 Low Sync Speed
Are you using a Vigor 130 as well?

Cheers

Please Log in or Create an account to join the conversation.

More
26 May 2016 18:44 #6 by piste basher
Replied by piste basher on topic Re: Vigor 130 Low Sync Speed
I have used a 130 but have currently switched back to my 2860, both were stable at 34998.

Please Log in or Create an account to join the conversation.