marcellus305 wrote:
Did this issue ever get resolved? I have the exact same issue.

I have raised a Ticket with Support but have had no response.

Thanks

https://www.draytek.co.uk/support/guides/sky-fibre-setup-guide

Set the Vigor 130 modem in Bridge Mode and enter the Sky settings in your router.

From this guide https://www.draytek.co.uk/support/guides/sky-fibre-setup-guide

You will see:



and in the footnote



as AdrianH54 says, the router is where you put the Sky settings

With regard to the images of the 130 GUI posted above, note that in actuality on the VLAN tag insertion page the Customer box is on the left on UK devices and in my set up, where I use the 130 in Bridge mode in order to access it directly using the virtual WAN feature on the Draytek routers, the VDSL2 is set to ENABLE in the Customer box but the tag value 101 is in the Router, not in the 130. In the Service box (on the right, not on the left as in that image) the tag is set to DISABLE. It really is time that Draytek corrected those images..... :?

Thanks.

I'm glad you mentioned the subtle difference in the UI of the UK version of the Vigor 130.

I'm now looking to setup the Vigor 2752ac to work with the Vigor 130.

Back to the guide .