DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2820 Load-balancing does not stick after policy defined
- unwise1
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 20
- Thank you received: 0
16 Sep 2010 16:50 #63813
by unwise1
Replied by unwise1 on topic 2820 Load-balancing does not stick after policy defined
Good luck with it. Judging from there being only 3 of us in this boat, the problem is either very specific to circumstances or others either don't load balance or use linux, mac or such. Perhaps I'll start up Ubuntu and give it a go..
Please post if you get anywhere or not as the case may be
Please post if you get anywhere or not as the case may be
Please Log in or Create an account to join the conversation.
- simondo
- Offline
- Junior Member
Less
More
- Posts: 12
- Thank you received: 0
16 Sep 2010 17:14 #63814
by simondo
Replied by simondo on topic 2820 Load-balancing does not stick after policy defined
Just had a breakthrough of sorts:
Our Lan topology looks something like
Internet
|
Draytek
|
Windows EBS Server
|
Switch
|
Workstations
When I connected to the router through wi-fi, rather than through the wired desktop connection which goes through the EBS server, it works consistently.
Interesting, if somewhat annoying!
Our Lan topology looks something like
Internet
|
Draytek
|
Windows EBS Server
|
Switch
|
Workstations
When I connected to the router through wi-fi, rather than through the wired desktop connection which goes through the EBS server, it works consistently.
Interesting, if somewhat annoying!
Please Log in or Create an account to join the conversation.
- unwise1
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 20
- Thank you received: 0
16 Sep 2010 17:14 #63815
by unwise1
Replied by unwise1 on topic 2820 Load-balancing does not stick after policy defined
My last post was only a little later than yours, so I guess I should type quicker!
Have now seen that 3.3.4 is available since June and the readme says
91. Fixed: A load balance bug.
but gives no further info. Have not tried it yet. Interestingly the Draytek Taiwan site describes how to set up a scheduled reboot, that's also not a part of 3.3.3
Regards
Have now seen that 3.3.4 is available since June and the readme says
91. Fixed: A load balance bug.
but gives no further info. Have not tried it yet. Interestingly the Draytek Taiwan site describes how to set up a scheduled reboot, that's also not a part of 3.3.3
Regards
Please Log in or Create an account to join the conversation.
- simondo
- Offline
- Junior Member
Less
More
- Posts: 12
- Thank you received: 0
16 Sep 2010 17:17 #63816
by simondo
Replied by simondo on topic 2820 Load-balancing does not stick after policy defined
I'm avoiding 3.3.4 due to the issues detailed in a thread here. I've got the fear!
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek