DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Replacing a Vigor 120 with a Vigor 130?

  • adrianh54
  • User
  • User
More
06 Mar 2018 14:15 #13 by adrianh54
Replied by adrianh54 on topic Re: Replacing a Vigor 120 with a Vigor 130?
Reading this I had a sense of Deja vu , the same situation was reported a few months ago.

https://forum.draytek.co.uk/viewtopic.php?f=2&t=21945

Try logging in to the modem and reflashing the firmware via TFTP .

Please Log in or Create an account to join the conversation.

  • modemmisery
  • Topic Author
  • User
  • User
More
06 Mar 2018 17:00 #14 by modemmisery
Replied by modemmisery on topic Re: Replacing a Vigor 120 with a Vigor 130?

AdrianH54 wrote: Reading this I had a sense of Deja vu , the same situation was reported a few months ago.

https://forum.draytek.co.uk/viewtopic.php?f=2&t=21945

Try logging in to the modem and reflashing the firmware via TFTP .



Thank you very much for your reply.

Am I right in guessing you used the _STD version of the firmware rather than the _BT (UK specific) version?

Do you know if there is any merit in using TFTP to upload the firmware over that of uploading the firmware with a web browser? The latter seems the easiest way of doing it and is the way I have upgraded the firmware on by Vigor 120s.

Please Log in or Create an account to join the conversation.

  • adrianh54
  • User
  • User
More
06 Mar 2018 18:06 #15 by adrianh54
Replied by adrianh54 on topic Re: Replacing a Vigor 120 with a Vigor 130?
It wasn't my modem in question, I just remembered the question.

DrayTek support suggested the user reflash using TFTP , I think it is better where there are problems.

You could try the alternative firmware, that works well with ECI street cabinets, if your not sure then stick with the BT version which should be fine with Zen Adsl.

Please Log in or Create an account to join the conversation.

  • modemmisery
  • Topic Author
  • User
  • User
More
07 Mar 2018 08:54 #16 by modemmisery
Replied by modemmisery on topic Re: Replacing a Vigor 120 with a Vigor 130?

AdrianH54 wrote: It wasn't my modem in question, I just remembered the question.

DrayTek support suggested the user reflash using TFTP , I think it is better where there are problems.

You could try the alternative firmware, that works well with ECI street cabinets, if your not sure then stick with the BT version which should be fine with Zen Adsl.



I understand - thanks very much. :)

Please Log in or Create an account to join the conversation.