Any idea where I can get Firmware 3.2.1?

We just got a 2820Vn and the broken passthrough is a nightmare as several of our customers have Sonicwall firewalls.

I have tried the random fiddling above but no luck

EDIT: I found firmware 3.2.1 and I now have this working.

I have an open ticket with Draytek, so i will forward them this thread.

I had trouble getting my Cisco VPN client working through a 2100Vn router with 3.3.0 firmware. After some scratching around I found that there is a telnet command...

Code:

srv nat ipsecpass on

This is all that was needed in my case.

Tried the 3.3.2 (stable) firmware now and the problem still exist :?

If you disable a service in the "VPN and Remote Access >> Remote Access Control Setup" tab you'll get a brick !!

:evil:

Had problems with the Sonicwall GVPN client with 3.3.1.2, so downgraded to 3.2.1 - which worked.

Unfortunately then had the problem with the Cisco client (even on 3.2.1)
But running the following command on the router fixed the Cisco client on both firmwares.

Code:

srv nat ipsecpass on

Well found S80_UK!

Just need to try the Sonicwall via the 3.3.1.2 firmware.

Update 11/08/09 - initial testing with the Sonicwall client shows this command fixes the problem.

I've got the same problem here but allowing ipsec passthough didn't work for me.

Could anyone tell me where to download the old 3.2.1 firmware from?

Checking back to see if any fixes, but no luck it seems.

Firmware 3.2.1 is available from ftp://ftp.draytek.com/Vigor2820/

or follow links from http://www.draytek.co.uk/support/ to the International FTP site.