DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

PSTN relay timing issue on 2820Vn

More
01 Nov 2010 15:19 #31 by plandregan
Replied by plandregan on topic PSTN relay timing issue on 2820Vn
I have a similar Issue. If I dial #0 I get PSTN dial tone for about 5 secs, then it clicks ad reverts back to Voip Dial tone. I cannot place any call or receive any call via PSTN

Please Log in or Create an account to join the conversation.

More
01 Nov 2010 16:27 #32 by admin
Replied by admin on topic PSTN relay timing issue on 2820Vn
Have you tried adjusting the gain ?

Forum Administrator

Please Log in or Create an account to join the conversation.

More
01 Nov 2010 16:54 #33 by plandregan
Replied by plandregan on topic PSTN relay timing issue on 2820Vn
Yes I have tried both ear and mic gain. There currently set to 6/6 for both Phone 1 and 2.

Please Log in or Create an account to join the conversation.

More
02 Nov 2010 07:28 #34 by admin
Replied by admin on topic PSTN relay timing issue on 2820Vn
Is it a very long line; maybe try removing extensiuon plate from NT£4 socket and plugging directly into master for experimentation.

Forum Administrator

Please Log in or Create an account to join the conversation.

More
02 Nov 2010 09:04 #35 by plandregan
Replied by plandregan on topic PSTN relay timing issue on 2820Vn
Tried that.even tried putting the un filtered cable in to the line in socket. No difference. Is there a setting to ignore a dial tone check, if it even checks

Please Log in or Create an account to join the conversation.