DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820Vn Firmware v3.3.4.1 available on draytek.com

More
23 Oct 2010 21:40 #64382 by bradley porter
Replied by bradley porter on topic 2820Vn Firmware v3.3.4.1 available on draytek.com
Dear all,

OK, I have had some feedback from Draytek. Please note. I am currently away on business and have not had chance to make the changes at the office. If someone wishes to verify this and post the results then that would be great.......

They have loaded up my configuration and simulated the issue. In short, my CALL filter (under firewall) was enabled and pointing to the same rule set as the DATA filter. This causes an issue in 3.3.4.1 which manifests itself as ADSL speed loss. A simple disable/amendment of the CALL filter and full speed is restored.

The CALL filter does not work in version 3.3.4 so this is why the issue has not reared its ugly head until the firmware upgrade.

If anyone has the slow ADSL issue and the capacity to try disabling the CALL filter and upgrading to 3.4.4.1 then I would be interested in the results.

Brad

Kind regards,
Bradley Porter

Please Log in or Create an account to join the conversation.

More
23 Oct 2010 21:46 #64383 by j.baker
If I change my call filter to be the same as my data filter....my speeds drop to about 2MB. Back on call filter 1 (default) speeds are normal.

I did however change my MTU to 1472 (using the ping testing method)

Regards

John Baker


Vigor2820 series with firmware 3.3.5.2_RC2
ADSL

Please Log in or Create an account to join the conversation.

More
23 Oct 2010 22:04 #64389 by bradley porter
Replied by bradley porter on topic 2820Vn Firmware v3.3.4.1 available on draytek.com

j.baker wrote: If I change my call filter to be the same as my data filter....my speeds drop to about 2MB. Back on call filter 1 (default) speeds are normal.


Is this on firmware version 3.3.4 or 3.3.4.1 you tried this on?

Kind regards,
Bradley Porter

Please Log in or Create an account to join the conversation.

More
23 Oct 2010 22:05 #64390 by j.baker
I am using 3.3.4.1

I will update my SIG

Regards

John Baker


Vigor2820 series with firmware 3.3.5.2_RC2
ADSL

Please Log in or Create an account to join the conversation.

More
23 Oct 2010 22:17 #64395 by bradley porter
Replied by bradley porter on topic 2820Vn Firmware v3.3.4.1 available on draytek.com
Thanks, John.

So, in essence, you agree that this does cause an issue?

Kind regards,
Bradley Porter

Please Log in or Create an account to join the conversation.

More
23 Oct 2010 23:01 #64396 by j.baker
It appears so. That and the MTU issue with the new firmware.

Regards

John Baker


Vigor2820 series with firmware 3.3.5.2_RC2
ADSL

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami