DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2820Vn Firmware v3.3.4.1 available on draytek.com
- reado
- Offline
- Junior Member
Less
More
- Posts: 57
- Thank you received: 0
24 Oct 2010 21:43 #64415
by reado
Replied by reado on topic 2820Vn Firmware v3.3.4.1 available on draytek.com
I spent yesterday downgrading to 3.3.3 and re-applying hundreds of settings all over again one by one. Using the exact same configuration as 3.3.4 and 3.3.4.1, all my issues have disappeared.
Please Log in or Create an account to join the conversation.
- adriandaz
- Offline
- Junior Member
Less
More
- Posts: 89
- Thank you received: 0
25 Oct 2010 21:24 #64452
by adriandaz
Replied by adriandaz on topic 2820Vn Firmware v3.3.4.1 available on draytek.com
Hi, I experienced speed issues while using the new firmware on two 2820 routers. One of them on a 17Mbit/1Mbit line and the other an 8Mbit/1Mbit line. Download speeds flucated all the time, problem was resolved by going back to the 3.3.4 firmware :?
Please Log in or Create an account to join the conversation.
- bradley porter
- Offline
- Junior Member
Less
More
- Posts: 75
- Thank you received: 0
25 Oct 2010 21:31 #64458
by bradley porter
What sort of speed was you getting on version 3.3.4.1? Was it below 2Mb/s?
Kind regards,
Bradley Porter
Replied by bradley porter on topic 2820Vn Firmware v3.3.4.1 available on draytek.com
Hi, I experienced speed issues while using the new firmware on two 2820 routers. One of them on a 17Mbit/1Mbit line and the other an 8Mbit/1Mbit line. Download speeds flucated all the time, problem was resolved by going back to the 3.3.4 firmwareadriandaz wrote:
:?
What sort of speed was you getting on version 3.3.4.1? Was it below 2Mb/s?
Kind regards,
Bradley Porter
Please Log in or Create an account to join the conversation.
- adriandaz
- Offline
- Junior Member
Less
More
- Posts: 89
- Thank you received: 0
25 Oct 2010 21:41 #64464
by adriandaz
Replied by adriandaz on topic 2820Vn Firmware v3.3.4.1 available on draytek.com
Yes, alot of the time it was if there was a cap fixed at 1.5Mbit on the line, even reported a fault with the ISP as it looked like it was capped at their end! - with the other router, my PC at work worked just fine, at the maximum throughput for the given line speed, but all other devices' throughput was slow,
Please Log in or Create an account to join the conversation.
- bradley porter
- Offline
- Junior Member
Less
More
- Posts: 75
- Thank you received: 0
25 Oct 2010 21:50 #64468
by bradley porter
Hmm - so you might be another good test base for this.
I am not sure if you have read the latest posts from me in the thread, but Draytek have found the issue with my 1.4 - 1.5Mb speeds after the upgrade to 3.3.4.1. They found that my CALL filter within firewalls was enabled and pointing to the same filter as my DATA filter. This was causing an issue and lowering the speed to that magic number - yes, you guessed it 1.4Mbs - 1.5Mbs.
So the question I pose is, do you have the CALL and DATA filter enabled on the Draytek AND does each one point to the same Filter Set? If so, removing this issue (disable the CALL filter is possible or pointing it to a different filter set) will bring full speed back to life.
[EDIT - the issue only occurs in 3.3.4.1 because the CALL filters do NOT work in 3.3.4!]
Kind regards,
Bradley Porter
Replied by bradley porter on topic 2820Vn Firmware v3.3.4.1 available on draytek.com
Yes, alot of the time it was if there was a cap fixed at 1.5Mbit on the line, even reported a fault with the ISP as it looked like it was capped at their end! - with the other router, my PC at work worked just fine, at the maximum throughput for the given line speed, but all other devices' throughput was slow,adriandaz wrote:
Hmm - so you might be another good test base for this.
I am not sure if you have read the latest posts from me in the thread, but Draytek have found the issue with my 1.4 - 1.5Mb speeds after the upgrade to 3.3.4.1. They found that my CALL filter within firewalls was enabled and pointing to the same filter as my DATA filter. This was causing an issue and lowering the speed to that magic number - yes, you guessed it 1.4Mbs - 1.5Mbs.
So the question I pose is, do you have the CALL and DATA filter enabled on the Draytek AND does each one point to the same Filter Set? If so, removing this issue (disable the CALL filter is possible or pointing it to a different filter set) will bring full speed back to life.
[EDIT - the issue only occurs in 3.3.4.1 because the CALL filters do NOT work in 3.3.4!]
Kind regards,
Bradley Porter
Please Log in or Create an account to join the conversation.
- adriandaz
- Offline
- Junior Member
Less
More
- Posts: 89
- Thank you received: 0
25 Oct 2010 22:05 #64469
by adriandaz
Replied by adriandaz on topic 2820Vn Firmware v3.3.4.1 available on draytek.com
I will try this, once out of peak time as ISP traffic shaping often lowers the speeds down to around 1.5Mbit anyway :lol:
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek