DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Current DrayTek Printer Compatibility
- Trail
- Visitor
25 Jul 2005 20:09 #25696
by Trail
Replied by Trail on topic Current DrayTek Printer Compatibility
Can't get epson stylus photo 900 to work. But all surrounding versions seem to work. (925, 890)
<- argh ->
<- argh ->
Please Log in or Create an account to join the conversation.
- johnbird
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
- peter-h
- Offline
- Junior Member
Less
More
- Posts: 60
- Thank you received: 0
06 Aug 2005 09:45 #26048
by peter-h
Replied by peter-h on topic Current DrayTek Printer Compatibility
Kyocera FS1020D. 2900Gi firmware v2.5.4.1_rc2.
It took a while to get it working. One has to use the base router IP; normally 192.168.1.1. the Kyocera software automatically names the port as IP_192.168.1.1. The printer install software doesn't ever find the printer; one has to set TCP/IP, it offers the option of a Generic network card. But that doesn't work. One has to go into control panel, change the port to LPR, queue name to "p1", enable byte counting.
Any questions, please email me onpeter4555@peter2000.co.uk as I rarely visit here.
It took a while to get it working. One has to use the base router IP; normally 192.168.1.1. the Kyocera software automatically names the port as IP_192.168.1.1. The printer install software doesn't ever find the printer; one has to set TCP/IP, it offers the option of a Generic network card. But that doesn't work. One has to go into control panel, change the port to LPR, queue name to "p1", enable byte counting.
Any questions, please email me on
Please Log in or Create an account to join the conversation.
- jolley
- Offline
- Junior Member
Less
More
- Posts: 17
- Thank you received: 0
06 Sep 2005 11:55 #26763
by jolley
And the 995C;-)
Replied by jolley on topic Current DrayTek Printer Compatibility
Hewlett Packard Deskjet 950c works fine with the Vigor 2600plusbirdbrain wrote:
And the 995C
Please Log in or Create an account to join the conversation.
- peter-h
- Offline
- Junior Member
Less
More
- Posts: 60
- Thank you received: 0
06 Sep 2005 13:22 #26765
by peter-h
Replied by peter-h on topic Current DrayTek Printer Compatibility
I do get a fairly persistent problem which is that any printout is preceeded by a page which is blank except for some garbage at the top. No problem; just a waste of paper...
Please Log in or Create an account to join the conversation.
- kevin ayling
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
01 Oct 2005 09:41 #27368
by kevin ayling
works fine but you do need to pay careful attention to the set up procedure, and especially if you change the default addresses in the router
KJA
Replied by kevin ayling on topic 2900 VG and 970 cxi
KJA
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek