Well that didnt last long, it's not there now!

Maybe you're looking at a cached page? It was changed on Wed.

Here's the URL: http://www.draytek.co.uk/support/download/v2820_333_RC5b.zip

following this thread as we have situation that appears to have same cause of 3.3.2.2 firmware on a 2820:

three offices: A has 2900, B has 2930, C has 2820

office A PPTP LANtoLan to office B
office B PPTP LantoLan to office C
office C PPTP LantoLan to office A

Intention is for anyone at any office to see all devices at every other office.

If A connects to B - everything works fine
If A connects to B then B connects to C, everything works fine

If B connects to C, then A connects to B, nothing can ping anything on another subnet

So the VPNs that the 2820 create seem to be causing issues.

Like the initiator of this thread, the VPNs in connection mgt appear to be up but not traffic is passing.

Interested to know if 333RC5b/Beta resolved this issue for anyone.

Can't install it myself just now since don't want to do it over a VPN, but will go over to the 2820 office tomorrow and give it a go

I should get to test RC5b over the weekend and will post back - It also looks like that version has the 'better' modem code with it.

It is also back on the support -> download page of the UK site too. If anyone else can test it faster than me and feed back to us that would be good!

I got it installed last night. I can confirm it's with the modem code that works better on my line (+500kb of sync).

I've not been able to test the problematic VPN tunnel yet - that'll be a job for the weekend.

I did come across some strange site-to-site routing issues when running:
site a - vigor 2800
site b - vigor 2800
site c - vigor 2820vn
which need further investigation, whereby traffic circled round indefinitely. This may be a configuration issue. Each site has site-to-site definitions to each other site (b, c are generally online, but a normally isn't). The theory is that any two sites can connect to each other if the other in unavailable. When just two sites are active, routing appears ok, but when the third comes online things get a bit screwy. This requires for investigation however.