I am happy to report (so far) that f/w 3.3.3RC5b is working all round.

Have just loaded it on and;

Wifi - working although only a very quick test.
VPN passthrough - working and connected at the moment.
Sync - Modem code is good and gave me a slightley higher sync again.

As it look like all the major things work I will leave this version on for a while now (till I find any problems that cause me issues) - It should be noted though I don't use the CSM stuff or any of those functions.

Unfortunately 3.3.3RC5b still exhibits same issue for my setup when using multiple VPNs (traffice stops flowing); will now check if IPSec is better than PPTP

I only have 1 setup from this PC at the moment - I have some work to do later this evening on another network so I will set up another VPN from this PC and let you know what happens.

I don't do any site to site VPN's from this router at all - sorry can't help on that front.

I also need to test inbound VPN termination onto this version of f/w - I will try and do that when I'm away later in the week.

So far no issues (that I have noted)

Web management page is still working
NAT still working
VPN (pass through) Still connected to my office
Sync still good - less errors too with this version even on my dodgy line.
WiFi no issues seen my end yet - but I'm not a huge wifi user.

Since PPTP's beyond the first one were not working and stopped the first once established working too, I switched them all to IPSec and so far everything has been fine. So it seems PPTP may still be broken in the 3.3.3RC5b firmware. Will update this if the IPSecs start to show issues too but after 20 mins all running fine.

I have 2 PPTP VPNS connected as I type and both are working for me..

I will leave them both connected and see when/if they die


09:11 - both still connected bu I have to go out now so I will see what happens when I get back later.