Apparently the issue is know in 1.2.0 and new f/w should be available soon.

Sorry DrayTek, you've lost another AP customer to Ubiquiti.
I simply cannot get my AP902 working on either 1.1.7.3 or 1.2.0 using RADIUS authentication.
I works for a while then just stops passing traffic.
I simply don't have the time to mess with something that doesn't work.
Alan

Yeah, reports aren't great from my end either. They're still having to reboot APs which is totally unacceptable. Going to raise it with my supplier on Monday and probably return the 910s and get Ubiquiti or Edimax Pro instead.

WrightClick wrote: Yeah, reports aren't great from my end either. They're still having to reboot APs which is totally unacceptable. Going to raise it with my supplier on Monday and probably return the 910s and get Ubiquiti or Edimax Pro instead.

Hi, cant really say to much on here as its a DrayTek Forum
So far (1 day) i'm impressed with my Ubiquiti APs (even after working with Cisco gear)
I ended up running the Controller software on a Ubuntu VM. (they dont have an internal web page)
Alan

admin wrote: Apparently the issue is know in 1.2.0 and new f/w should be available soon.

Any idea of ETA? This is getting painful.

I've given up waiting. Fortunately I kept all the packaging for the 910s so my supplier is accepting a return. Ordered some Edimax Pro CAP1200 instead (identical hardware, different firmware).

I looked at Ubiquiti, but the lack of an on-board web interface put me off, as well as the fact that you can't change the management VLAN, which is a bit of an issue with this particular setup.