As the advice is to upgrade, you need to contact support about the u/g problems to find out what's going wrong.

Thanks. Will do.

Hi guys,

This is happening to me too. Does anyone know where I can download the older firmware from please...

Cheers John.

NOTE: It's ok as I found the older firmware on the draytek.com server but there is deffo an issue with 1.2 that needs addressing.

Yes I am having similar issues since upgrading three AP910c to v1.2.0 firmware.

None of the previously connected devices ae working. I have gone through the process of forgetting the network and reconnecting - this worked for a few hours but again I now have no wifi connection.

I am raising a ticket with support but there is definitely an issue with the v1.2.0 firmware.

Cheers, Dave

I raised a support ticket last week.
They suggested I reset the AP910C to factory defaults and then re-apply all my settings. I wasn't willing to do that as I make a fair number of changes (guest isolated networks etc), so to apply that to multiple AP's, plus on an AP902 with f/w 1.2.0, is too much to do. I'd only do it if it really does fix the problem, but Draytek don't know if it will yet, or at least they haven't told me yet despite requests.

Just to add info to this thread,

After I found the previous firmware, I installed it straight over the top of 1.2.0 with NO factory default reset, as soon as the old firmware installed and the device rebooted evrything was back to normal.

John

ALso, after this fiascoe and Draytek seeming unwillng to acknowledge an issue I went out and bought some Ubiquti AC Pro's. Can't be doing with faulty frirmware, caused me hours of problems with clients....Sorry Draytek, lost customer on access points, still like the 2860 routers though....