DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2820and ADSL 2+ support
- nakita_dog
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
12 Jun 2009 18:13 #56293
by nakita_dog
2820and ADSL 2+ support was created by nakita_dog
Hi all,
I have two ADSL lines, and have just upgraded my internet on one line to ADSL 2+. I then found out through our service provider, IDNet, that the 2820 is not yet working with ADSL 2+. They also confirmed that Draytek are aware of this issue.
As this was one of the reasons I purchased this modem, I'm less than delighted.
When will a new firmware fix this issue?
Thanks.
I have two ADSL lines, and have just upgraded my internet on one line to ADSL 2+. I then found out through our service provider, IDNet, that the 2820 is not yet working with ADSL 2+. They also confirmed that Draytek are aware of this issue.
As this was one of the reasons I purchased this modem, I'm less than delighted.
When will a new firmware fix this issue?
Thanks.
Please Log in or Create an account to join the conversation.
- gordondack
- Offline
- New Member
Less
More
- Posts: 9
- Thank you received: 0
12 Jun 2009 22:17 #56298
by gordondack
The Vigor 2820 does work on ADSL2+, I'm using it with Bethere, perhaps you need to ensure your modulation is set to either multimode (which works for me) or ADSL2+ (G.992.5)
Replied by gordondack on topic Re: 2820and ADSL 2+ support
Hi all,nakita_dog wrote:
I have two ADSL lines, and have just upgraded my internet on one line to ADSL 2+. I then found out through our service provider, IDNet, that the 2820 is not yet working with ADSL 2+. They also confirmed that Draytek are aware of this issue.
As this was one of the reasons I purchased this modem, I'm less than delighted.
When will a new firmware fix this issue?
Thanks.
The Vigor 2820 does work on ADSL2+, I'm using it with Bethere, perhaps you need to ensure your modulation is set to either multimode (which works for me) or ADSL2+ (G.992.5)
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Site Admin
Less
More
- Posts: 1723
- Thank you received: 0
14 Jun 2009 16:09 #56307
by admin
As the other guy said, it's nonsense. The vigor2820 certainly supports ADSL2+, Annex A and M. Who was this ISP ?
Forum Administrator
Replied by admin on topic Re: 2820and ADSL 2+ support
I then found out through our service provider, IDNet, that the 2820 is not yet working with ADSL 2+. They also confirmed that Draytek are aware of this issue.nakita_dog wrote:
As the other guy said, it's nonsense. The vigor2820 certainly supports ADSL2+, Annex A and M. Who was this ISP ?
Forum Administrator
Please Log in or Create an account to join the conversation.
- nakita_dog
- Topic Author
- Offline
- New Member
Less
More
- Posts: 4
- Thank you received: 0
14 Jun 2009 18:59 #56309
by nakita_dog
IDNet. So why can't I get it to work then? I bought a Netgear router and it's working fine.
Replied by nakita_dog on topic Re: 2820and ADSL 2+ support
admin wrote:
IDNet. So why can't I get it to work then? I bought a Netgear router and it's working fine.
Please Log in or Create an account to join the conversation.
- gordondack
- Offline
- New Member
Less
More
- Posts: 9
- Thank you received: 0
14 Jun 2009 20:20 #56312
by gordondack
Well what settings are you using? As already stated what is your modulation set at? A bit more information is needed before anyone can answer why you can't get it to work.
Replied by gordondack on topic Re: 2820and ADSL 2+ support
nakita_dog wrote:
admin wrote:
IDNet. So why can't I get it to work then? I bought a Netgear router and it's working fine.
Well what settings are you using? As already stated what is your modulation set at? A bit more information is needed before anyone can answer why you can't get it to work.
Please Log in or Create an account to join the conversation.
- cbsys
- Offline
- Junior Member
Less
More
- Posts: 33
- Thank you received: 0
16 Jun 2009 14:08 #56356
by cbsys
Replied by cbsys on topic 2820and ADSL 2+ support
ADSL 2+ works fine here too!
It all depends on what modulation, VPI & VCI your provider is using.
It all depends on what modulation, VPI & VCI your provider is using.
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek