qwaz01 wrote:
Anyone tried the new firmware? Version 4.3.2.2

Yep, been up 15 days, no issues.

Am now on 4.3.2.3 seems stable - up time 13 days, but quite network for this particular one.

I did see memory usage at 75% and with a green bar initially - that has crept up to 81% now with an amber bar. Wondering if there is still a memort leak

4.3.2.4, memory right down, 84% to stable at 65%, been up 4 days and all good.

Can some one explain the new firmware Version numbering?

I have just upgraded an one of our 3910 with 4.3.2.3 from the Draytek Downloads. https://www.draytek.co.uk/support/downloads/vigor-3910

The router is now displaying: Current Firmware Version: 3.9.6.2_branch_beta r9_454_3f658b8

I really hope this is listed a Formal Release.

:?

My says the correct version. Try reflashing

Interesting I noticed a new bug in load balancing. Basically I've recently upgrade done line to fttp the other one is due tomorrow.
Anyway during testing I noticed that every pc used the fastest wan, wan 5 and not the the old fttc one, wan 6, despite being directed to do so.

If I test rule out the packets get sent down the right wan interface.

If i check the ip address the ip address is correct for the chosen wan.

However the speedtest everything goes via wan 5.

This is different from previously where it would combine the lines which a reboot would fix.

I was using the speedtest app