DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Setting up 2820n with Virgin Broadband
- njh
- Offline
- Member
-
Less
More
- Posts: 306
- Thank you received: 0
02 Mar 2010 21:11 #25
by njh
2900Gi/v2.5.6; 2900/v2.5.6
Replied by njh on topic Setting up 2820n with Virgin Broadband
Sorry, but that is exactly what cloning the MAC is for. Some older cable networks only allowed you to register one MAC address which was typically your PC's. Then if you bought a router you were forced to clone the PC's MAC address in the router.
It is totally correct to say use the PC's MAC address. The side effect of this that you can plug the CM into the router or PC without rebooting it in between.
It is totally correct to say use the PC's MAC address. The side effect of this that you can plug the CM into the router or PC without rebooting it in between.
2900Gi/v2.5.6; 2900/v2.5.6
Please Log in or Create an account to join the conversation.
- nilz38
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 26
- Thank you received: 0
02 Mar 2010 21:27 #26
by nilz38
Replied by nilz38 on topic Setting up 2820n with Virgin Broadband
I am going to test this out hopefully tomorrow, I shall tick obtain IP address automaticalyl and add the MAC address of the machine I am using.
I shall keep you posted:?
I shall keep you posted
Please Log in or Create an account to join the conversation.
- nilz38
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 26
- Thank you received: 0
03 Mar 2010 20:56 #27
by nilz38
Replied by nilz38 on topic Setting up 2820n with Virgin Broadband
Ok I have tried this on my on another Virgin Internet, which did not work, I checked obtain IP address automatically and added the MAC address of the Laptop, restarted the router and modem and got nothing. One thing does concern me , when I initially set this up I set this up through the Quick Start Wizard and selected "Static IP address" is this correct or which should be selected from below
PPPoE
PPTP
L2TP
Static IP
DHCP
PPPoE
PPTP
L2TP
Static IP
DHCP
Please Log in or Create an account to join the conversation.
- njh
- Offline
- Member
-
Less
More
- Posts: 306
- Thank you received: 0
- nilz38
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 26
- Thank you received: 0
03 Mar 2010 21:38 #29
by nilz38
Replied by nilz38 on topic Setting up 2820n with Virgin Broadband
I think this is where I have been going wrong I had selected Static IP. I shall reset the router and try this again. I shall let you know how I get on this Friday. :oops:
Please Log in or Create an account to join the conversation.
- njh
- Offline
- Member
-
Less
More
- Posts: 306
- Thank you received: 0
04 Mar 2010 19:20 #30
by njh
2900Gi/v2.5.6; 2900/v2.5.6
Replied by njh on topic Setting up 2820n with Virgin Broadband
It should not matter what you chose when using the wizard. You should be able to change the settings manually afterwards.
2900Gi/v2.5.6; 2900/v2.5.6
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek