DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

WARNING - Vigor 3910 firmware issues

  • rolandrat
  • User
  • User
More
23 Mar 2021 15:13 #103 by rolandrat
Replied by rolandrat on topic Re: WARNING - Vigor 3910 firmware issues
3.9.6
Check your Port forwarding after upgrade, the few I had setup had changed to WAN interface WAN8 only instead of ALL.

Please Log in or Create an account to join the conversation.

  • therealbraderz
  • User
  • User
More
25 Mar 2021 00:33 #104 by therealbraderz
Replied by therealbraderz on topic Re: WARNING - Vigor 3910 firmware issues
Joining this thread as I have frustrations with the 3910 firmware.

3.9.2.5 worked well except it can't do IGMP snooping, so that traffic got forwarded on all ports.

3.9.6 can do IGMP snooping which works properly, but since the upgrade I noticed the drayddns service doesn't get the IP address updated. The only way I can update it is by logging into myvigor and forcing an update. Selecting force update within the router management page shows in the log but does not update the A record.

I have gone back to 3.9.2.5 because having no ddns is much worse for me than no IGMP snooping.

Please Log in or Create an account to join the conversation.

  • qwaz01
  • Topic Author
  • User
  • User
More
25 Mar 2021 08:57 #105 by qwaz01
Replied by qwaz01 on topic Re: WARNING - Vigor 3910 firmware issues

therealbraderz wrote:
Joining this thread as I have frustrations with the 3910 firmware.

3.9.2.5 worked well except it can't do IGMP snooping, so that traffic got forwarded on all ports.

3.9.6 can do IGMP snooping which works properly, but since the upgrade I noticed the drayddns service doesn't get the IP address updated. The only way I can update it is by logging into myvigor and forcing an update. Selecting force update within the router management page shows in the log but does not update the A record.

I have gone back to 3.9.2.5 because having no ddns is much worse for me than no IGMP snooping.



Have you seen the email about updating your MyVigor account? I think they have changed the security and the instructions say to update MyVigor before updating the firmware.

Please Log in or Create an account to join the conversation.

  • rolandrat
  • User
  • User
More
25 Mar 2021 09:19 #106 by rolandrat
Replied by rolandrat on topic Re: WARNING - Vigor 3910 firmware issues
Ive not seen any ddns issues but will keep an eye out, myvigor was upgraded first as per email and is currently showing both my 2 different wan ip's on the portal.

Please Log in or Create an account to join the conversation.

  • therealbraderz
  • User
  • User
More
25 Mar 2021 15:47 #107 by therealbraderz
Replied by therealbraderz on topic Re: WARNING - Vigor 3910 firmware issues
Didn't see the email.

Will look for it and have another go.

Cheers.

Please Log in or Create an account to join the conversation.

  • therealbraderz
  • User
  • User
More
25 Mar 2021 16:19 #108 by therealbraderz
Replied by therealbraderz on topic Re: WARNING - Vigor 3910 firmware issues
Found the email, clicked the link, and upgraded the firmware again.

All working now, so my mistake. Would be good if they posted the same information and instructions on the downloads page or in the release notes though.

In that case this firmware looks promising!

Cheers

Please Log in or Create an account to join the conversation.